Conférences - Fabrication additive, impression 3D

Sélecionner un pays
TOUS LES PAYS (24)
1
11. Mittweidaer Lasertagung
13 nov 2019 - 14 nov 2019 • Mittweida, Allemagne
Résumé:
Am 13. und 14.11.2019 findet die 11. Mittweidaer Lasertagung an der Hochschule Mittweida statt. Das Tagungsprogramm beinhaltet 33 Fachvorträge in 7 Sessions sowie Posterbeiträge zu den Themenschwerpunkten Hochrate-Laserbearbeitung, Mikro/Nanolaserbearbeitung, Grundlagen der Lasermikrobearbeitung, Prozessmonitoring und Laseranwendung in der Medizintechnik. Die Keynotes halten Prof. Dr. Reinhart Poprawe (Fraunhofer ILT / RWTH Aachen) und Prof. Dr. Andrés F. Lasagni (TU Dresden / Fraunhofer IWS).
Contact:
Tagungsbüro;     Tél.: [03727 58 1070];     Email.: mlt@hs-mittweida.de
Sujets:
Hochrate-Laserbearbeitung, Mikro/Nanolaserbearbeitung, Lasermikrobearbeitung, Prozessmonitoring
Identifiant de l'évènement:
1259889
Sujets apparentés:
2
TCF2019 — Technical Compounds Forum
03 dec 2019 - 04 dec 2019 • Tampa, États-Unis
Résumé:
This year we are planning dedicated sessions on hot topics such as wear-resistant plastics, conductive compounds, light-weight solutions for metal replacement, polymers for the car of the future, and materials for 3D printing.
Contact:
Tél.: [610 478 0800];     Email.: kelly.defino@ami.international
Identifiant de l'évènement:
1209560
3
Polymers for 3D Printing 2019 — Developing polymers and filaments for optimised 3D printing applications
11 dec 2019 - 12 dec 2019 • Düsseldorf, Allemagne
Organisateur:
AMI – Applied Market Information Ltd
Résumé:
Expert speakers will cover the latest developments in plastics resins and compounds for a variety of 3D printing and rapid manufacturing methods to accelerate product development and production.
Identifiant de l'évènement:
1169538
4
Welding 2020 — WJAM International Conference 2020
27 jan 2020 - 29 jan 2020 • Tel Aviv, Israël
Organisateur:
Association of Engineers, Architects and Graduates in Technological Sciences in Israel (AEAI)
Sujets:
Welding, Joining and Additive Manufacturing WJAM
Identifiant de l'évènement:
1248125
5
TCT Japan — THE EVENT FOR 3D PRINTING AND ADDITIVE MANUFACTURING
29 jan 2020 - 31 jan 2020 • Tokyo, Japon
Résumé:
Since its launch in 2015, TCT Japan (formally 3D Printing Japan) has become one of Japan’s leading design-to-manufacturing events focused on Additive Manufacturing, 3D printing, design and engineering technology.
Identifiant de l'évènement:
1248170
Sujets apparentés:
6
SPIE BiOS20 – Biomedical Optics | Part of SPIE Photonics West 2020
01 fév 2020 - 06 fév 2020 • San Francisco, États-Unis
Résumé:
BiOS 2020, part of SPIE Photonics West 2020, is the world’s largest biomedical optics and biophotonics conference. Topics range from biomedical optics, photonic diagnostic and therapeutic tools and systems, nano/biophotonics, new imaging modalities, OCT, neurophotonics, optogenetics, and tissue optics.
Contact:
Customer Service;     Tél.: [+1 360 676 3290];     Email.: customerservice@spie.org
Sujets:
biomedical optics, biomedical imaging, neurosurgery conference, call for papers, photonics, spie photonics west, photonics west
Identifiant de l'évènement:
1225794
Sujets apparentés:
7
31st Manufacturing World Japan
26 fév 2020 - 28 fév 2020 • Makuhari Messe, Japon
Organisateur:
Reed Exhibitions Japan Ltd.
Identifiant de l'évènement:
1248248
Sujets apparentés:
8
International Symposium on Plastics Technology
10 mar 2020 • Aix-la-Chapelle, Allemagne
Résumé:
Dear Colleagues, It is an honour and a pleasure for me to invite you to the first IKV International Symposium on Plastics Technology on 10 March 2020 in Aachen. The symposium will bring together scientists and experts from all over the world who are involved in the future of plastics. The symposium will offer an exceptional forum to learn, participate and network with the people who play a leading role in the field of plastics technology. The scientific program will keep you abreast of the latest know-how in polymer science and technology. Our session topics: Additive manufacturing; Circular economy; Extrusion; Injection moulding; Lightweight technologies; Plastics Industry 4.0. With your paper and presentation, you can contribute to enhancing the quality and diversity of the discussions. You should therefore take the opportunity to present your topic to a broad scientific public. The symposium will, without doubt, be a valuable occasion to generate new ideas in the middle of a motivated scientific community. I look forward to welcoming you in Aachen, Prof. Dr.-Ing. Christian Hopmann
Contact:
Tél.: [+49 241 80-28363];     Email.: symposium@ikv.rwth-aachen.de
Sujets:
Additive manufacturing, Circular economy, Extrusion, Injection moulding, Lightweight technologies, Plastics Industry 4.0
Identifiant de l'évènement:
1263034
9
4th Additive Manufacturing Forum 2020
11 mar 2020 - 12 mar 2020 • Berlin, Allemagne
Sujets:
Leading European conference & exhibition for additive manufacturing
Identifiant de l'évènement:
1248148
Sujets apparentés:
10
30th International Colloquium Plastics Technology
11 mar 2020 - 12 mar 2020 • Aix-la-Chapelle, Allemagne
Résumé:
The coming International Colloquium Plastics Technology, due to take place on 11–12 March 2020 in the Eurogress Aachen, will be a very special occasion: It will be the 30th time that the world of plastics meets up for the Colloquium in Aachen and, at the same time, we will celebrate in 2020 not only the 70th birthday of IKV but also the 150th anniversary of RWTH Aachen University. The delegates at the 30th Colloquium will be able to attend a total of 15 lecture sessions, each consisting of two presentations from IKV scientists and a keynote paper from an industry expert. As far as the topics are concerned, the sessions will cover the entire range of IKV research. In addition, around five plenary papers given by speakers from science and industry will draw attention to special trend topics.

The accompanying trade show, the traditional get-together on the evening before the Colloquium and the tour of the IKV laboratories and pilot plants will offer an excellent opportunity for networking. You will find further information on the content of the program in the next edition of IKV.Insight.

We look forward to welcoming you again in Aachen for the Colloquium so that we can celebrate our anniversaries with you. And perhaps we will also be able to celebrate with you the premiere of our International Symposium on Plastics Technology, which will be held for the first time on 10 March 2020 – the day before the Colloquium.

Contact:
Tél.: [+49 241 80-93877];     Email.: akademie@ikv.rwth-aachen.de
Sujets:
Additive manufacturing, Circular economy, Extrusion, Injection moulding, Lightweight technologies, Plastics Industry 4.0
Identifiant de l'évènement:
1263088
11
DDMC 2020 — Fraunhofer Direct Digital Manufacturing Conference DDMC
18 mar 2020 - 19 mar 2020 • Berlin, Allemagne
Organisateur:
Fraunhofer Additive Manufacturing Alliance
Résumé:
Welcome to DDMC 2020! Organized by the Fraunhofer Additive Manufacturing Alliance, the DDMC is a bi-annual cutting-edge forum for discussion on Additive Manufacturing, including its application in industry and the environmental impact of such new manufacturing technologies. Organized by the Fraunhofer Additive Manufacturing Alliance, the DDMC is a bi-annual cutting-edge forum for discussion on Additive Manufacturing, including its application in industry and the environmental impact of such new manufacturing technologies. Impact on health, sustainability and technology will also be discussed.
Identifiant de l'évènement:
1248091
12
AMUG 2020 — AMUG Conference
22 mar 2020 - 26 mar 2020 • Chicago, États-Unis
Organisateur:
Additive Manufacturing Users Group (AMUG)
Résumé:
Additive Manufacturing Users Group (AMUG) Conference brings together engineers, designers, managers, and educators from around the world to share expertise, best practices, challenges, and application developments in additive manufacturing.
Identifiant de l'évènement:
1248188
13
PM China 2020 — Shanghai International Powder Metallurgy Exhibition & Conference
24 mar 2020 - 26 mar 2020 • Shanghai , Chine
Résumé:
Shanghai International Powder Metallurgy Exhibition & Conference (short as PM CHINA ) was established in 2008, and has been successfully held to the thirteenth session.
Identifiant de l'évènement:
1248268
14
Future3DAM — Future 3D Additive Manufacturing – the 3DMM2O Conference 2020: 3D Hybrid Organotypic Systems
29 mar 2020 - 02 avr 2020 • Schöntal, Allemagne
Organisateur:
Cluster of Excellence 3D Matter Made to Order, Karlsruhe Institut of Technology (KIT), Heidelberg University
Résumé:
The conference aims to foster discussions on innovative and interdisciplinary approaches in the fields of 3D bioprinting, tissue engineering, neuronal organoids, and especially in development and physiology of the retina.
Contact:
Conference Management;     Tél.: [004972160845791];     Email.: info@3dmattermadetoorder.kit.edu.
Sujets:
3D bioprinting, tissue engineering, neuronal organoids, development and physiology of the retina
Identifiant de l'évènement:
1288670
15
Rapid + TCT 2020
20 avr 2020 - 23 avr 2020 • Anaheim, États-Unis
Résumé:
RAPID + TCT is where the entire additive manufacturing community convenes, and where industry-accelerating products are launched. The expansive show floor and conference are unparalleled in the industry. It’s where you’ll see the newest 3D technologies from over 400 exhibitors, including 3D printing, 3D scanning, CAD/CAE, metrology & inspection, and related technologies. It’s also where you’ll find solutions to your toughest manufacturing challenges, straight from the most respected experts. Don’t miss out on North America’s most influential additive manufacturing event.
Identifiant de l'évènement:
1248212
Sujets apparentés:
16
PRAXISforum — Additive Manufacturing
27 mai 2020 - 28 mai 2020 • DECHEMA-Haus, Frankfurt/Main, Allemagne
Organisateur:
DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
Identifiant de l'évènement:
1254787
17
36th INTERNATIONAL CONFERENCE of THE POLYMER PROCESSING SOCIETY
31 mai 2020 - 04 jui 2020 • Montreal, Canada
18
Drupa 2020 — VDMA Additive Manufacturing Association Conference
16 jui 2020 - 26 jui 2020 • Düsseldorf, Allemagne
Résumé:
Drupa will take place from 16 to 26 June 2020 in Düsseldorf. The VDMA Additive Manufacturing Association will be represented at drupa with a ten-day lecture program and the special touchpoint 3D fab+print forum.
Identifiant de l'évènement:
1248143
19
CIMTEC 2020 — 9th Forum on New Materials
20 jui 2020 - 23 jui 2020 • Montecatini Terme, Italie
20
AMPM 2020 — North America's Leading Metal Additive Manufacturing Conference
27 jui 2020 - 01 jul 2020 • Montreal, Canada
Organisateur:
Metal Powder Industries Federation (MPIF)
Résumé:
Additive Manufacturing with Powder Metallurgy brings together global experts presenting the latest developments in this fast-growing field. Topics include materials, processes, technical advances & barriers, and applications.
Identifiant de l'évènement:
1248186
21
Tungsten2020 — International Conference on Tungsten, Refractory & Hardmaterials
27 jui 2020 - 01 jul 2020 • Montreal, Canada
Organisateur:
Metal Powder Industries Federation (MPIF)
Résumé:
The 9th International Conference on Tungsten, Refractory & Hardmaterials was held in 2014 and numerous developments have taken place in the intervening years. Remarkable among these has been the explosive development of additive manufacturing (3D printing) using refractory metals and alloys, and their carbides. There has also been a notable initiative, driven by concerns for environment, safety, and health (ESH), toward the development of cobalt-free carbide and alloy compositions.
Identifiant de l'évènement:
1248206
22
FEBIP — 8th International Workshop on Focused Electron Beam-Induced Processing
08 jul 2020 - 10 jul 2020 • Glasgow , Royaume-Uni
Identifiant de l'évènement:
1234332
Sujets apparentés:
Page web:
23
Metallographie-Tagung 2020
16 sep 2020 - 18 sep 2020 • Saarbrücken, Allemagne
Organisateur:
DGM e. V. c/o Inventum GmbH
Résumé:
Die 54. Metallographie-Tagung wird im Jahre 2020 in Saarbrücken stattfinden. Die Themen werden neben den traditionellen Schwerpunkten der Präparation und mikroskopischen Gefügeabbildung, der Gefügeanalyse sowie der metallographischen Schadensanalyse vor allem in zwei zukunftsträchtigen Bereichen liegen, für die der Saarbrücker Campus mit seinen Experten und seiner technischen Ausstattung wie kein zweiter in Deutschland steht. Das ist einerseits die Weiterentwicklung und Anwendung aller Tomographieverfahren von der Mikro- über die Nano- bis zur atomaren Skala und andererseits die Anwendung modernster Informatikkompetenz auf die drängende systematische und effiziente Digitalisierung.
Contact:
DGM e. V. c/o Inventum GmbH;     Tél.: [+49 (69) 75306 741];     Email.: metallographie@dgm.de
Sujets:
Präparationstechnik, mikroskopisch, Charakterisierung, Materialographie, Materialklassen, Qualitativ, quantitativ, Gefügeanalyse, Korrelation, Materialeigenschaften, Tomographie, 3D, digital, Bildverarbeitung, Analytik, Gefüge, Untersuchungen, Bewertung, Schadensfälle, Metallographie, Metallografie, Materialentwicklung, Prozessentwicklung, Struktur, Funktion, Werkstoffe, Digitalisierung, Präparation, Schadensanalyse, Zukunft, Tomographie, Mikro, Nano, atomar, Informatik, Materialwissenschaft, DGM, Metalle, Stahl, Eisen, Keramik, Aluminium
Identifiant de l'évènement:
1286603
24
AMPM 2021 — North America's Leading Metal Additive Manufacturing Conference
20 jui 2021 - 23 jui 2021 • Orlando FL, États-Unis
Organisateur:
Metal Powder Industries Federation (MPIF)
Résumé:
Additive Manufacturing with Powder Metallurgy brings together global experts presenting the latest developments in this fast-growing field. Topics include materials, processes, technical advances & barriers, and applications.
Identifiant de l'évènement:
1248174


Conference-Service.com met à la disposition de ses visiteurs des listes de conférences et réunions dans le domaine scientifique. Ces listes sont publiées pour le bénéfice des personnes qui cherchent une conférence, mais aussi, bien sûr, pour celui des organisateurs. Noter que, malgré tout le soin que nous apportons à la vérification des données entrées dans nos listes, nous ne pouvons accepter de responsabilité en ce qui concerne leur exactitude ou étendue. Pensez donc à vérifier les informations présentées avec les organisateurs de la conférence ou de la réunion avant de vous engager à y participer!

Dernière mise à jour: 31 Octobre 2019