Tagungen und Workshops zum Thema Maschinenbau

Conference-Service.com stellt der Öffentlichkeit ein Kalendarium wichtiger Konferenzen, Symposien und sonstiger Tagungen im wissenschaftlich-technischen Bereich zur Verfügung. Obwohl das Verzeichnis mit großer Sorgfalt zusammengestellt und ständig aktualisiert wird, weisen wir auf die Möglichkeit von Fehlern ausdrücklich hin. Bitte vergewissern Sie sich immer beim Veranstalter, bevor Sie über die Teilnahme oder Nichtteilnahme an einer Konferenz entscheiden.

Organisatoren können kostenlos ihre Konferenzankündigungen veröffentlichen.

ALLE LÄNDER

1.
 
BRAKE DISC ANALYSIS WITH THE HELP OF ANSYS SOFTWARE — Conferences and Meetings on Mechanical engineering
ID
848790
Termin
08. Nov 2016 - 09. Jun 2017
Ort
Berlin, Deutschland
Zusammenfassung
There is lot of upgrade in the technology of the automobile these days. Competition on the speed of vehicles going on in the market. But also this speed leads to accidents if vehicle don’t stop on time. Disc brakes in the vehicles give much better performance compare to drum to stop the vehicle also the heat generated during braking force can be easily dissipated as disc brakes are open to atmosphere. But the main problem is with the material used in the disc brakes in some vehicle. Manufacturers use disc of steel which have short life span and the weight is bulky near the tire. If disc loses its shape wobbling can caused near the tire causing a big problem. The main motto of this thesis is to improve the strength of the disc by taking various materials for analysis. The design has been taken from real world. Dimensions of Santro Xing car has been taken and plotted in three dimensions on solid works. Materials like Al-ni-co & titanium alloy has been selected for analysis to compare it with existing material. 3D model has been imported on analysis to analyze the stresses produced in the disc brake and to check the deformation occurred in the disc after applying the boundary conditions. After all the analysis comparison has been made and a result has been concluded for the best material with good strength.
Kontakt
Janvijay Pateriya;     Tel.: [+919424492733];     Email: janvijaypateriya.india@gmail.com
Themen
Ansys Software, Thermal Analysis, Brake Disc, Cast Iron.
2.
 
Schweißkonstruktionen — Festigkeitsverhalten und fügetechnische Gestaltung von Schweißkonstruktionen: Grundlagen - Beanspruchung - Gestaltung
ID
840270
Termin
22. Feb 2017 - 23. Feb 2017
Ort
Berlin (Haus der Technik e. V. am Alexanderplatz) , Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Verfahrenstechnik, Anlagetechnik, Energie
3.
 
ISME 2017 — 1st International and 18th ISME Conference on Enabling Sustainable Development in Mechanical Engineering
ID
828967
Termin
23. Feb 2017 - 25. Feb 2017
Ort
Warangal, Indien
Zusammenfassung
The Indian Society of Mechanical Engineers (ISME) is organizing an international conference on “Enabling Sustainable Development in Mechanical Engineering from 23rd-25th February, 2017 at National Institute of Technology Warangal. In the new millennium, research in mechanical engineering has progressed towards emerging areas such as processing of advanced materials, micro/nano manufacturing, microfluidics, energy harvesting and utilization, biomechanics, medical robotics and precision mechatronics. The purpose of this conference will be to bring together the mechanical engineering community to explore, disseminate and strengthen initiatives in such new directions under the broad areas of Machine Design, Thermal Engineering, Materials and Manufacturing, and Industrial Engineering.
Kontakt
Prof. N. Selvaraj / Prof. G. Amba Prasad Rao;     Tel.: [8332969315 / 8332969316];     Email: isme.nitw@gmail.com
Themen
ISME, ISME 2017, ISME2017, ISME-NITW, ISME NITW, ISME-NITW-2017, ISME NITW 2017, Machine Design, Thermal Engineering, Materials and Manufacturing, Industrial Engineering, International Conference in Mechanical Engineering, ISME conference, isme conference, Analysis and Design of Mechanical Systems, CAD / CAE, Condition Monitoring, Fatigue Fracture and Failure Analysis, Finite Element Methods, Mechanisms, Product Design and Development, Robotics, Robust Design, Rotor Dynamics, Tribology, Vehicle Dynamics, Vibrations, Alternate Fuels, Automobile Engineering, Combustion, Computational Fluid Dynamics, Energy Management and Audit, Fluid Mechanics, Gas Dynamics, Gas Turbines, Heat and Mass Transfer, Internal Combustion Engines, Micro Fluidics, Refrigeration and Air-conditioning, Renewable Sources of Energy, Additive Manufacturing, Advanced Manufacturing Processes, Advances in Welding/Casting/Forming Processes, CIM / CAM, Composite Materials, Conventional Machining, Flexible Manufacturing Systems, Fluid Power Systems, Materials Characterization, Mechatronics, Micro and Nano Manufacturing, Modeling and Simulation of Manufacturing systems, Nano Materials Processing, Non-Destructive Testing, Powder Metallurgy, Rapid Proto Typing, Un Conventional Machining, Design and Analysis of Experiments, Entrepreneurship Development, Lean Manufacturing, Manufacturing Management, Product Life cycle Management, Quality Engineering, Reliability Engineering, Supply Chain Management, Soft Computing Techniques
4.
 
IWRAWJ — International Workshop on Recent Advances in Welding and Joining
ID
873089
Termin
16. Mär 2017 - 18. Mär 2017
Ort
Sangamner, Indien
Zusammenfassung
The objective of this International Workshop is to abreast all welding scientists, professionals, and academicians to unfold the new advances in welding and joining welding innovations; skilling methods; weld characterization; safety, health, and environment, etc. The workshop will cover the latest developments and advances in welding technology.
Kontakt
Prof. Vijay Gadakh;     Tel.: [+91-8668710308];     Email: vijay.gadakh@avcoe.org
Themen
international, mechanical, workshop, advance, welding, joining, conference
5.
 
Schwingungsanalyse — Schwingungsanalyse in Wellensträngen - Torsions- und Biegeschwingungen von Maschinenteilen
ID
840514
Termin
28. Mär 2017 - 29. Mär 2017
Ort
Berlin (Haus der Technik e. V. am Alexanderplatz) , Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Sicherheit, Energie, Maschinenbau, Konstruktion
6.
 
Schadensanalyse Metall — Schadensanalyse an metallischen Bauteilen
ID
840513
Termin
28. Mär 2017 - 29. Mär 2017
Ort
Berlin (Deutsche Gesellschaft für Zerstörungsfreie, Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Maschinenbau, Bau, Werkstoffe, Baukonstruktion
7.
 
Prüfstandstechnik — Prüfstandstechnik in der Betriebsfestigkeit mit Praxisvorführungen
ID
840501
Termin
30. Mär 2017 - 31. Mär 2017
Ort
Berlin (Haus der Technik e. V. am Alexanderplatz) , Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Maschinenbau, Bau, Werkstoffe, Baukonstruktion
8.
 
NC17 — Sixteenth International Conference on Numerical Combustion
ID
831996
Termin
03. Apr 2017 - 05. Apr 2017
Ort
Rosen Plaza Hotel, Orlando, Florida, Vereinigte Staaten
Verwandte Fachgebiete
9.
 
Konstruktionsmethodik — Entwicklungs- und Konstruktionsmethodik im Automobil- und Maschinenbau
ID
840585
Termin
05. Apr 2017 - 06. Apr 2017
Ort
Berlin (Haus der Technik e. V. am Alexanderplatz), Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Maschinenbau, Fahrzeugtechnik, Konstruktion, Berechnung
10.
 
InstandhaltungsForum 2017
ID
871495
Termin
06. Apr 2017 - 07. Apr 2017
Ort
Dortmund, Deutschland
Zusammenfassung
Das InstandhaltungsForum ist seit mehr als 30 Jahren die Plattform zur Vernetzung in der Instandhaltungsbranche. Im Dialog zwischen Praxis und Wissenschaft werden stets aktuelle und zukünftige Themen der Instandhaltung behandelt, um neue Impulse zu setzen. Bei der 17. Auflage des Forums liegt das Hauptaugenmerk auf der Darstellung von konkreten Beispielen und Erfahrungswerten einer Instandhaltung für die Industrie 4.0 – der Smart Maintenance.
Kontakt
Dennis Meyer;     Email: meyer@lfo.tu-dortmund.de
Verwandte Fachgebiete
11.
 
icames — INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING SCIENCES
ID
871189
Termin
21. Apr 2017 - 22. Apr 2017
Ort
Mandya, Indien
Zusammenfassung
INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING SCIENCES” (ICAMES) -2017. It will be held on 21st – 22nd April 2017 at Mandya, Karnataka. ICAMES-17 and is being organized by P.E.S College of Engineering, Mandya and IFERP (Institute for Engineering Research and Publication)-India to provide an opportunity to research scholars, delegates and students to interact and share their experience and knowledge in technology application. ICAMES-17 will provide an excellent international forum for sharing knowledge and results in Advances in Mechanical Engineering Science and Technology. The aim of the Conference is to provide a platform to the researchers and practitioners from both academia as well as industry to meet the share cutting-edge development in the field.
Kontakt
Email: info@icames.in
Webseite
12.
 
Isolation von Körperschall — AKUSTIK: Isolation von Körperschall und Lärm
ID
840610
Termin
27. Apr 2017 - 28. Apr 2017
Ort
Essen (Haus der Technik) , Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Maschinenbau, Akustik, Konstruktion, Berechnung
13.
 
Umbau von Altmaschinen — Umbau von Altmaschinen und die wesentliche Veränderung
ID
840717
Beginn
03. Mai 2017
Ort
Berlin (Haus der Technik e. V. am Alexanderplatz), Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Verfahrenstechnik, Anlagetechnik, Verfahrenstechnik, Maschinenbau
14.
 
REMOO 2017 — The 7th International ENERGY Conference REMOO 2017
ID
820722
Termin
10. Mai 2017 - 12. Mai 2017
Ort
Venedig, Italien
Zusammenfassung
The 7th International ENERGY Conference & Workshop REMOO 2017 with the theme of “ENERGY FOR TOMORROW” will be held on 10–12 May 2017, in Venice, Italy. REMOO provides an international platform for discussion, acquirement of new professional contacts and business opportunities in energy sector.
Kontakt
Sebastian Mueller;     Tel.: [+49 9131 9179614];     Email: remoo@renecon.eu
Themen
Energy, Power Plant, Materials and Structural Analyses, Mathematical Modelling and Computer Simulations, Experimental Support, Electrical Grids, Energy Storage, System Safety and Cyber Security
Verwandte Fachgebiete
Webseite
15.
 
Angewandte akustische Messtechnik — Angewandte akustische Messtechnik - sinnvolle Lösungen im betrieblichen Alltag
ID
840828
Beginn
18. Mai 2017
Ort
Dresden (Technische Universität Dresden), Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Akustik, Schwingungen, Maschinenbau
16.
 
Automation & Robotics Expo -2016
ID
723698
Termin
18. Mai 2017 - 20. Mai 2017
Ort
Noida, New Delhi, India, Indien
Zusammenfassung
Automation & Robotics Expo -2017- The Premier showcase of Indian Automation Industry & is one of its kind shows scheduled in Noida starting from 18th -20th May 2017 at Expo Centre Noida, Noida

Automation & Robotics Expo -2017 as an exhibition features the biggest names in the global Automation Industry, to whom it serves as the perfect launch vehicle to introduce latest products and technology. Automation & Robotics Expo 2017 showcases products and technology conforming to global standards and specifications. A large number of business and technology partnerships are also transacted during the 3 day period giving it a must attend event status amongst global exhibitions.

Organisers also host the Events related to Power & Fuel, Steel & Cement, Roads & Highways, Construction & Its Technologies, pharmaceuticals and many more These activities enjoy active participation from government departments like the Ministry of Power, Ministry of Coal, Ministry of Steel, Ministry of Heavy Industries and top ranking officials from leading government institutions. Automation & Robotics Expo-2017 also enjoys active support and patronage of key Indian industry institutions.

Kontakt
Ajay Kumar;     Tel.: [9702961888];     Email: ajay.kumar@automationexpo.net
Themen
Process Automation, Industrial Automation, Factory Automation, Industrial robots, Field Automation and Instrumentation, Inductrial valves, Control and Instrumentation, surface technology, Lab instruments, Hydraulics and Pneumatics, Building Automation
17.
 
FAVCEE 2017 — Future Armoured Vehicles Central and Eastern Europe
ID
879470
Termin
20. Mai 2017 - 16. Mai 2017
Ort
Prag, Tschechische Republik
Zusammenfassung
With particular focus on the collaboration between military, research and industry, Future Armoured Vehicles Central and Eastern Europe invites not only programme managers, capability directors and operational commanders from the armed forces, but also ensures the lead engineers, chief scientists and platform managers from the leading solution providers are present.

This technical focus will aim to further cover the core areas of the combat vehicle, ranging from survivability, armour and active protection to anti-armour weapons, communications and systems integration. In addition, key updates from military programme managers, operational commanders and land force planners will provide an overview of the current operational environment, training, areas for capability development and practices for test and evaluation.

18.
 
ICMCM — 2017 International Conference on Mechanics of Composite Materials
ID
854416
Termin
27. Mai 2017 - 29. Mai 2017
Ort
Bangkok, Thailand
Zusammenfassung
2017 International Conference on Mechanics of Composite Materials (ICMCM 2017) will be held from May 27-29, 2017 in Bangkok, Thailand. This Conference is organized by Hong Kong Association for Science and Engineering; and it is supported by National Taiwan University.

Publication

*All papers will be reviewed by two or three experts . After a careful reviewing process, all registered and presented paper will be published  by  Trans Tech Publication Ltd. from Switzerland www.scientific.net/NHC (Nano Hybrids and Composites)-and indexed by ESCI (Web of Science, Thomson Reuters); Inspec (IET, Institution of Engineering Technology) etc.

Invited Speakers:

Prof.Alessandro Pegoretti from University of Trento, Italy

Prof. Anand Krishna Asundi from Nanyang Technological University, Singapore

Prof. Taiki Saito from Toyohashi University of Technology, Japan

Prof. Huan-Tsung Chang from National Taiwan University, Chinese Taipei

Submission Methods:

Accepted full paper will be invited to give the oral presentation at the conference and be published in the conference proceeding/Journal.

Please log in the https://easychair.org/conferences/?conf=icmcm2017 ; ( .pdf only) to submit your full paper .

For any inquiry about the conference, please feel free to contact us at:   icmcm@hkase.org

About More information, please browse the website: http://www.icmcm-hkase.org/

Welcome to submit your papers, and attend these valuable and important conferences.

Ms. Silvia Chan

Tel: +852-58081525

E-mail: icmcm@hkase.org

Kontakt
Silvia Chan;     Tel.: [+852-58081525];     Email: icmcm@hkase.org
Themen
Structure and properties of constituents Properties of polymeric, metallic, and ceramic matrices Properties of fillers, nanoparticles, and organic and natural reinforcing fibers Role of interface, measurements, and optimization Composite materials application in aeronautics and space Properties of composite materials Finite element modeling (FEM) Production and maintenance aspects Time-and environment-dependent properties and durability Long-term properties, creep, and aging Environmental effects Prediction of long-term deformations Mechanical aspects of technology Resin infusion processes Flow of nonlinear polymer melts in porous media Recycling of advanced composites Strength, fracture, damage and fatigue Interaction and sequence of inter- and intralaminar damage and failure in composites Measurements of fracture toughness Delamination of laminates Fatigue under complex loading histories Prediction of fatigue lifetime and accelerated tests Structures Methods of optimization of composite structures Sandwich structural and joint design Intelligent systems Active and passive control systems Damage monitoring in structures and seismic design Composites in civil engineering and infrastructure Fiber-reinforced plastics for concrete structures Polymer composites for renovation of structures Polymers in concrete Biomechanics Mechanics of biological tissues Mechanics of prosthesis of biological organs
19.
 
MERCon — 2017 Moratuwa Engineering Research Conference
ID
872875
Termin
30. Mai 2017 - 31. Mai 2017
Ort
Moratuwa, Sri Lanka
Zusammenfassung
MERCon 2017 aims to discuss the research and development in multidisciplinary engineering fields such as electrical and electronics engineering, computer engineering, material and chemical engineering, mechanical engineering, robotics, automation and control, textile and clothing engineering, civil and structural engineering and management of technology.
Verwandte Fachgebiete
20.
 
ELMA — 2017 15th International Conference on Electrical Machines, Drives and Power Systems
ID
859361
Termin
01. Jun 2017 - 03. Jun 2017
Ort
Sofia, Bulgarien
Zusammenfassung
The scope of the conference is covered by the folowing topics: electrical machines, transformers,electromgnetism, electrical drives, robotics, mehatronics, new materials and components, renewable energy, electric traction, electritechnologies, marketing, education
21.
 
International business exhibition — Accessories & Cutting Tools Exhibition in Coimbatore.
ID
849709
Termin
01. Jun 2017 - 05. Jun 2017
Ort
Coimbatore, Indien
Zusammenfassung
This much-awaited International Industrial Trade Fair INTEC 2017 IS brought to you by CODISSIA - The Coimbatore District Small Industries Association, brings together the very best intechnological advancement. INTEC is a congregation of various Industries exhibiting their finest innovations and services.
Kontakt
Tejas;     Tel.: [8698106961];     Email: tejas@hemworld.in
Themen
Industrial Trade Exhibitions, Manufacturing Industry Trade Expo, Manufacturing Trade Shows, Industrial Trade Fair, Industrial Trade Shows, international business exhibition, international machine tools exhibition, International Business Conference & Exhibition, International Business trade show Event, International fairs, exhibitions, events
22.
 
International Machine Industries Trade Show
ID
854585
Termin
01. Jun 2017 - 05. Jun 2017
Ort
Coimbatore, Indien
Kontakt
Tejas;     Tel.: [8698106961];     Email: tejas@hemworld.in
Themen
Intec is much-awaited International Industrial Trade Fair INTEC 2017 IS brought to you by CODISSIA - The Coimbatore District Small Industries Association, brings together the very best in technological advancement. INTEC is a congregation of various Industries exhibiting their finest innovations and services.
23.
 
Intec — Industrial engineering trade shows in india
ID
858197
Termin
01. Jun 2017 - 05. Jun 2017
Ort
Coimbatore, Indien
Zusammenfassung
Intec is much-awaited International Industrial Trade Fair INTEC 2017 IS brought to you by CODISSIA - The Coimbatore District Small Industries Association, brings together the very best intechnological advancement. INTEC is a congregation of various Industries exhibiting their finest innovations and services.

Conducted by CODISSIA - an ISO 9001:2000 organization, INTEC is an ITPO (India Trade Promotion Organization) approved trade fair, with due support from the Central & State Governments. The fair supports SSI units with special concessions for stall rental charges at the discretion of SIDBI. With wide global participation, it is an ideal platform to launch new products, invite inquiries and generate potential leads across the globe.

Kontakt
Tejas;     Tel.: [+91 8698106961];     Email: tejas@hemworld.in
Verwandte Fachgebiete
24.
 
GT17 — Gasturbinen und Gasturbinernbetrieb 2017
ID
834866
Termin
07. Jun 2017 - 08. Jun 2017
Ort
Friedrichshafen, Deutschland
Zusammenfassung
Im Zweijahresrhythmus werden Betreiber, Hersteller, Versicherer, Behörden und Experten des R&D-Bereiches vom VGB PowerTech e.V. dazu eingeladen, durch Vorträge und umfassende Diskussion aktueller Fragen zur Gasturbine und dem Gasturbinenbetrieb den Erfahrungs-, Erkenntnis- und Gedankenaustausch zu intensivieren.

Ziel dieser Fachtagung ist es einerseits, verfügbare Lösungen für einen wirtschaftlichen Gasturbinenbetrieb in einem extrem schwierigen Marktumfeld unter Berücksichtigung der Aspekte Verfügbarkeit, Zuverlässigkeit, Wirkungsgrad, Flexibilität und Lebensdauer aufzuzeigen. Andererseits sollen innovative Konzepte auf Bauteil-, Komponenten und Systemebene diskutiert werden, die helfen können, die für Gasturbinen seitens der Politik zugedachte Rolle zur zukünftigen Sicherstellung der Versorgungssicherheit in Deutschland und zur Stärkung der Kraft-Wärme-Kopplung auszufüllen.

Die Fachtagung richtet sich an Betreiber, Hersteller, Planer, Versicherer und alle an der Technik und deren Umfeld interessierte Fachleute, Forscher, Behörden- und Verbändevertreter.

Kontakt
Diana Ringhoff;     Tel.: [+49 201 8128-232];     Email: diana.ringhoff@vgb.org
Themen
Energiepolitische Rahmenbedingungen, Flexibilitätssteigerung, Absenkung Mindestlast, Einhaltung Emissionsgrenzwerte, Verbesserung Lastgradienten, Brennstoff-Flexibilität, Heavy Duty Bestandsanlagen, Peak-Load-Bereich, Instandhaltung und Modernisierung, Inspektions-/Revisionsintervalle, EOH-Konzept, Innovative Technologien, Innovative Kühltechniken, Heißgaspfad, Brennertechnologie, Emissionsminderung, Brennerkammer-Bypass, Betriebserfahrungen
Verwandte Fachgebiete
25.
 
Schwingungsdiagnose Level 1 — Schwingungsdiagnose Level 1
ID
840770
Termin
13. Jun 2017 - 14. Jun 2017
Ort
Berlin (Haus der Technik e. V. am Alexanderplatz), Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Sicherheit, Energie, Maschinenbau, Konstruktion
26.
 
Reiberregte Schwingungen — Reiberregte Schwingungen - Phänomene, Methoden, Abhilfemaßnahmen
ID
840856
Termin
19. Jun 2017 - 20. Jun 2017
Ort
Berlin (Haus der Technik e. V. am Alexanderplatz), Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Akustik, Schwingungen, Maschinenbau
27.
 
Rotordynamik — Rotordynamik - Schwingungen in rotierenden Maschinenteilen
ID
840875
Termin
22. Jun 2017 - 23. Jun 2017
Ort
Berlin (Haus der Technik e. V. am Alexanderplatz), Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Verfahrenstechnik, Anlagetechnik, Energie
28.
 
Schwingungsdiagnose — Schwingungsdiagnose Level 3
ID
840884
Termin
27. Jun 2017 - 28. Jun 2017
Ort
Berlin (Haus der Technik e. V. am Alexanderplatz), Deutschland
Kontakt
Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin;     Tel.: 030 39493411;     Email: h.cramer-jekosch@hdt.de
Themen
Seminar, Weiterbildung, Akustik, Schwingungen, Maschinenbau
29.
 
Fatigue 2017
ID
773765
Termin
03. Jul 2017 - 05. Jul 2017
Ort
Cambridge, Großbritannien
Zusammenfassung
Fatigue 2017 will bring the international fatigue and durability community together to share knowledge, and understand the challenges, in using high performance materials for reliable and cost effective products. The conference builds on the long established philosophy of the Engineering Integrity Society to provide a forum for practising engineers and researchers to exchange ideas and experiences in all aspects of structural integrity. The 3 day conference will focus on the complex interplay between materials and their processing, advanced manufacturing methods, and the subsequent durability and reliability of the products.
Verwandte Fachgebiete
30.
 
ICMTMTE 2017 — International Conference on Modern Trends in Manufacturing Technologies and Equipment 2017
ID
854835
Termin
11. Sep 2017 - 15. Sep 2017
Ort
Sevastopol, Russische Föderation
Zusammenfassung
This conference provides opportunities for scientists and industry experts to summarize the latest developments in technologies of manufacturing of all types of materials and manufacturing equipment improvement, to discuss future directions of development of new technique and technologies, to establish useful contacts with partners for future collaboration.
Kontakt
Dr. Stanislav Roshchupkin;     Email: icmtmte@gmail.com
Themen
New manufacturing technologies and advanced material processing, Additive manufacturing, Precision, micro- and nano-machining, High Speed and Abrasive Machining, Nontraditional manufacturing processes, Monitoring and diagnostics of the machining Processes, Surface Integrity and Machining Quality, Cutting Mechanisms modeling, analysis and simulation, Mechanization and automation of manufacturing processes, Functional and protective surfaces, New Machine Tools and Tooling Technology, New functional, structural and nanomaterials, Advances in CAD/CAM/CAE technologies, Biomedical manufacturing, Production systems optimization
31.
 
Vehicle Acoustics — Vehicle Acoustics
ID
858156
Termin
25. Sep 2017 - 29. Sep 2017
Ort
Aachen, Deutschland
Zusammenfassung
The seminar participants will be given an extensive insight into the topic of vehicle acoustics. A special focus lies on teaching which is closely connected to practical units. Knowledge of vehicle-specific, acoustic mode of action and the thereby ensuing corrective measures will be imparted. The course objective is for participants to gain a solid foundation knowledge in order to evaluate problems of vehicle acoustics.
Kontakt
Sonja Kaufmann;     Tel.: [+49 241 80 97742];     Email: S.Kaufmann@academy.rwth-aachen.de
Themen
vehicles, acoustics, noise level, vibration and sound comfort
32.
 
In-factory Logistics Using Mobile Robots
ID
858130
Termin
23. Okt 2017 - 27. Okt 2017
Ort
Aachen, Deutschland
Zusammenfassung
Autonomous mobile robots are expected to play an important role in modern factories. Mobile robots are complex cyber-physical systems that combine sensors, actuators as well as computing devices that enable them to reason about and interact with the environment. The ability of these systems to reason about their environment and to select a corresponding behavior poses new challenges for evaluation and certification. On the one hand, the autonomy of these systems expands their operational envelopment and makes them suitable for a broad area of applications. This course will give an introduction to the architecture of mobile transportation robots and will detail the main building blocks of these systems.

Participants will understand the potentials of a flexible material flow and how to build adaptive production systems using mobile robots. They will learn methods for planning transport orders, coordinating a fleet of mobile robots and planning collision-free and efficient paths. Finally, they will implement and test the methods using a fleet of mobile robots.

Kontakt
Sonja Kaufmann;     Tel.: [+49 241 80 97742];     Email: S.Kaufmann@academy.rwth-aachen.de
Themen
mobile robots, autonomous, smart factory, factories, cyber-physical systems, sensors

Interessant...

Ihr Banner-Ad könnte an dieser Stelle erscheinen!

Stand vom 21. Februar 2017