Conferences  >  Continuing Professional Education, Courses  >  Continuing Professional Education, Courses (general)

Select a location
ALL COUNTRIES (26)
1
Technology Training — Maintenance Solutions: Concepts to Troubleshooting
26 Sep 2023 - 28 Sep 2023 • Greenville, SC, United States
Organizer:
Association for Iron & Steel Technology (AIST)
Abstract:
This workshop-based training seminar will provide attendees with hands-on instruction, tools, and the best available technologies for mechanical, electrical, lubrication, hydraulics, management system maintenance and reliability solutions. In addition, maintenance and outage planning, system design, and maintenance troubleshooting and techniques will all be covered. Manufacturing reliability is an integral part of sustainability in the metals industry. Improvement in reliability is essential to assuring manufacturing results at the lowest cost. Both operations and maintenance personnel must understand the direction their organizations need to take with respect to improving and managing their equipment maintenance programs.
Event listing ID:
1542044
Related subject(s):
2
Course — TECNICO addetto alla Protezione Catodica di strutture metalliche interrate e immerse
02 Oct 2023 - 06 Oct 2023 • Milan, Italy
Organizer:
European Federation of Corrosion (EFC)
Event listing ID:
1551110
3
Technology Training — Secondary Steelmaking Refractories – A Practical Training Seminar
03 Oct 2023 - 05 Oct 2023 • Tempe, AZ, United States
Organizer:
Association for Iron & Steel Technology (AIST)
Abstract:
Secondary steelmaking refractory maintenance is vital to both productivity and safety in a meltshop and caster. It is important for those involved to have a thorough understanding of the basic concepts of refractory system design. Consultants, suppliers and recognized industry experts have developed a curriculum to educate attendees on the following topics: refractory raw material selection; properties of refractories, application and limitations of refractories; theory and application of insulation; design and application of stir plugs, lances and slidegates; free opens, refractory handling, installation and pre-heating; ladle secondary steelmaking — LMF; and casting requirements and wear mechanisms.
Event listing ID:
1542023
Related subject(s):
4
IT Security Camp | 09. – 11. Oktober 2023 | München & online
09 Oct 2023 - 11 Oct 2023 • Munich, Germany
Organizer:
Entwickler Akademie
Abstract:
Vom 09. – 11. Oktober 2023 präsentiert die Entwickler Akademie das Intensivseminar für IT-Security. Das IT Security Camp bietet während drei Workshoptagen einen ausführlichen Einstieg in die Thematik der IT-Sicherheit. Die Schulung mit Coach Christian Schneider ist durch den hohen Übungsanteil sehr praxisnah.

Das Training mit Christian Schneider, der als freiberuflicher White Hat Hacker, Trainer und Security-Coach tätig ist, richtet sich an Pentesting- und DevSecOps-interessierte Entwickler:innen, Test Engineers und DevOps Engineers, die an einem Intensiv Einstieg in IT-Security interessiert sind.

Contact:
Phone: [+49(0)30-2148066-51];     Email: ypreuss@entwickler-akademie.de
Topics:
Intensivseminar, Security-Checks, IT-Security, DevSecOps, Cloud-Security-Checks
Event listing ID:
1563565
5
Distinguished Instructor Short Course — Distributed acoustic sensing for seismic measurements – what geophysicists and engineers need to know
10 Oct 2023 - 11 Oct 2023 • Virtual, Any Location (virtual event)
Abstract:
Geoscientists and engineers are very comfortable using seismic data sets acquired with geophones, hydrophones, and accelerometers because we have a long, well-defined set of standards for acquiring, processing, and interpreting them. However, distributed acoustic sensing (DAS) seismic measurements are rapidly augmenting, and in some cases replacing, the data from these conventional tools. Technologists are frequently unaccustomed to using DAS seismic data sets since it directly acquires relative strain or strain rate measurements and not the more familiar pressure, displacement, velocity, and acceleration data. There are also acquisition parameter selections that must be made to optimize the acquired data to accomplish the purpose of the seismic survey. This course is designed to build an intuition and understanding of the value, limitations, and applications of DAS seismic technology. In addition to the lecture and accompanying book, software will be provided, which will allow the student to interactively explore DAS seismic technology.
Event listing ID:
1559266
6
Technology Training — Specialty Alloy and Foundry – A Practical Training Seminar
10 Oct 2023 - 12 Oct 2023 • Milwaukee, WI, United States
Organizer:
Association for Iron & Steel Technology (AIST)
Abstract:
This two-and-a-half-day seminar provides an overview of melting, refining, and solidification in stainless and specialty steel mills and foundries. Products, process cycles and safety will be discussed along with alloy chemistry, material selection, induction furnace melting, refractories, refining, ingot casting and remelting.
Event listing ID:
1542002
Related subject(s):
7
Virtual Classroom — Geometric Tolerancing Applications (GD&T) and Tolerance Stacks
12 Oct 2023 - 13 Oct 2023 • online, United States
Organizer:
The American Society of Mechanical Engineers (ASME)
Abstract:
Learn how to take the guesswork out of the manufacturing process, to improve quality and avoid costly mistakes.
Topics:
Apply Geometric Dimensioning and Tolerancing (GD&T) to your designs and perform tolerance stacks through authentic case studies.
Event listing ID:
1559051
Related subject(s):
8
Technology Training — Electrical Engineering Basics: 102
16 Oct 2023 - 18 Oct 2023 • Memphis, TN, United States
Organizer:
Association for Iron & Steel Technology (AIST)
Abstract:
Electricity is everywhere — no steel mill operates without it. Everything from the coffee pot to the lights to the massive surge of energy to melt in the electric arc furnace. This course is designed for those who would like to have a basic knowledge of electrical engineering principles as applied in the steel industry. Attendees will gain a fundamental basis for applying these principles in their everyday work — the terminology, the application, the physical equipment, designs, process controls and automation. The relationship of hardware and controls will be highlighted, and much more.
Event listing ID:
1541970
9
Technology Training — Continuous Casting – A Practical Training Seminar
17 Oct 2023 - 19 Oct 2023 • Florence, IN, United States
Organizer:
Association for Iron & Steel Technology (AIST)
Abstract:
Developed and presented with the talented resources of the Continuous Casting Technology Committee, this informative program targets the heart of steelmaking: the frontline operator. The key focus of the program is to discuss the practical aspects of casting slabs, billets and blooms, while introducing the theoretical concepts. By achieving the proper teaching balance, attendee understanding of the process is ensured without the need for a technical background. This course is a must for the progressive, informed and educated steelmaker of the future!
Event listing ID:
1542048
Related subject(s):
10
Course — TECNICO SENIOR addetto alla Protezione Catodica di strutture metalliche interrate e immerse
23 Oct 2023 - 27 Oct 2023 • Milan, Italy
Organizer:
European Federation of Corrosion (EFC)
Event listing ID:
1551124
11
CTM München — Chief Technology Manager München
13 Nov 2023 - 17 Nov 2023 • Aachen, Germany
Organizer:
RWTH International Academy
Abstract:
Identify successful approaches to technology and innovation management for the effective identification, evaluation and development of new technologies. On this basis, design a consistent strategy and derive your future fields of action. Test the knowledge gained in practical exercises to develop innovative business models for your individual market success on this basis
Contact:
Further Education;     Email: further-education@academy.rwth-aachen.de
Event listing ID:
1520264
Related subject(s):
Event website:
12
LCA November — Fundamentals of Life Cycle Assessments for Industrial Products
20 Nov 2023 - 24 Nov 2023 • Aachen, Germany
Organizer:
RWTH International Academy gGmbH
Abstract:
Learn to represent and quantify material and energy flows relevant to the process as input or output variables in the various life phases of the product, process or service. In addition, you will be able to use the Life Cycle Assessment tool for process optimisation decisions that focus on added value.
Contact:
Further Education;     Email: further-education@academy.rwth-aachen.de
Event listing ID:
1520303
Event website:
13
Course — SPECIALISTA addetto alla Protezione Catodica di strutture metalliche interrate e immerse
20 Nov 2023 - 24 Nov 2023 • Milan, Italy
Organizer:
European Federation of Corrosion (EFC)
Event listing ID:
1551114
14
SCCE's Compliance Risk Assessment and Management
12 Dec 2023 - 13 Dec 2023 • online, United States
Abstract:
This virtual workshop will give you a comprehensive look at how to perform better compliance risk assessments — an essential element of any compliance and ethics program. Whether your organization already has a mature model in place or is just beginning its risk assessment journey, you’ll learn how to conduct a thorough assessment that will help you identify inherent risks to your organization or issues within your system of processes and procedures. Instructors will utilize numerous examples to illustrate key principles and attendees will have opportunities to work through exercises and examples from the industry of their choice (including healthcare, manufacturing, sales, etc.).
Event listing ID:
1571474
15
Course — Introduction to Ground Testing Facilities
15 Jan 2024 - 17 Jan 2024 • Sint-Genesius-Rode (near Brussels) - hybrid, Belgium
Organizer:
von Karman Institute for Fluid Dynamics
Abstract:
Ground testing facilities have been used since long in aeronautics and aerospace, as they have been developed for environmental and industrial applications. Nowadays they are still major sources of key data for investigations in all fields of fluid dynamics. This hybrid lecture series (online / on-site) is organized for student and engineers to provide a general understanding of the design, operation and application of ground testing facilities from all speed regimes. Experimental methodology is exposed as well as the interpretation of the data and their extrapolation to real situation. The course includes an on-site presentation of the VKI facilities during a lab visit (for on-site participation only). A question/answer session will be organized for the online participants. The schedule of this session will be communicated later. This Lecture series is based on the long tradition and experience developed at VKI on experimental testing.
Event listing ID:
1572643
16
Healthcare Basic Compliance Academy
22 Jan 2024 - 25 Jan 2024 • Orlando, FL, United States
Abstract:
Designed for professionals with some compliance knowledge and experience, HCCA’s Healthcare Basic Compliance Academy is ideal for practitioners who are ready to support, enhance, and oversee a comprehensive compliance program in a healthcare setting. The Academy provides three-and-a-half-days of classroom-style learning that addresses methods for implementing and managing compliance programs based on the Seven Element Approach.
Event listing ID:
1571453
17
Course — Introduction to Computational Fluid Dynamics
22 Jan 2024 - 26 Jan 2024 • Sint-Genesius-Rode (near Brussels) - hybrid, Belgium
Organizer:
von Karman Institute for Fluid Dynamics
Abstract:
The objective of these hybrid (online / on-site) lecture series on "Introduction to CFD" is to provide an elementary tutorial presentation on computational fluid dynamics (CFD), emphasizing the fundamentals and surveying a variety of solution techniques whose applications range from low speed incompressible flow to hypersonic flow. At the conclusion of the course, an attendee will be well prepared to understand the literature in this field, to follow more sophisticated state-of-the-art lecture series, and to begin the application of CFD to his or her special areas of concern. The techniques to be discussed will be applicable to all fields of fluid dynamics including aeronautics, industrial flows, wind energy etc.
Event listing ID:
1572642
18
Course — Data-Driven Fluid Mechanics: Combining First Principles and Machine Learning
29 Jan 2024 - 02 Feb 2024 • Université libre de Bruxelles (ULB), Belgium
Organizer:
von Karman Institute for Fluid Dynamics | Universit� libre de Bruxelles (ULB)
Abstract:
The integration of machine learning methods in fluid mechanics continues to grow and open new frontiers. Combining first principles and machine learning offers new avenues to improve predictions and control design, identify patterns, reduce computational costs, enhance measurement techniques, and more generally, get deeper insights into complex fluid phenomena. This lecture series provides an overview of the current state of the art and a pedagogical introduction to the fundamentals of machine learning tools for fluid dynamics. The course is in its second edition. It follows the successful lecture series held in 2020, which attracted more than 200 participants and resulted in an edited book published by Cambridge University Press.
Event listing ID:
1572674
19
Course — Radial Compressor Design and Optimization
05 Feb 2024 - 09 Feb 2024 • Sint-Genesius-Rode (near Brussels) - hybrid, Belgium
Organizer:
von Karman Institute for Fluid Dynamics
Abstract:
This short course is the regular course on radial compressors thought at VKI to the turbomachinery students specializing in compressors in the context of the ‘Research Master in Fluid Dynamics’. It provides an overview of the present knowledge and flow models and intends to provide a good background for the people interested in the aerodynamic design of radial compressors. This 5 day course is now made available to a limited number of people from outside VKI.
Event listing ID:
1572739
20
Course — Introductory course to OpenFOAM®
19 Mar 2024 - 20 Mar 2024 • Sint-Genesius-Rode (near Brussels), Belgium
Organizer:
von Karman Institute for Fluid Dynamics
Abstract:
The course gives a practical introduction to the structure and usability of OpenFoam and OpenFOAM related applications (snappyHexMesh, paraview). Besides the general introduction the participants will perform a complete numerical simulation starting from choosing the solver till post-processing. The second day will be partially dedicated to the open source mesh generator snappyHexMesh and a multiphase simulation will be performed with the obtained mesh.
Event listing ID:
1572704
21
Course — OpenFOAM® general programming
21 Mar 2024 • Sint-Genesius-Rode (near Brussels), Belgium
Organizer:
von Karman Institute for Fluid Dynamics
Abstract:
The programing course shows the how-to for the most common programming issues in OpenFOAM® covering the implementation of new solver, adding own boundary conditions, modifying turbulence models and defining user-specific utilities. During these programing experiences the participants will get familiar with the highly templated language of OpenFOAM®, with the difference of static and dynamic linking. Basic knowledge of setting up and running OpenFOAM® cases is requested in order to be able to follow the course efficiently!
Event listing ID:
1572670
22
28th Annual Compliance Institute
14 Apr 2024 - 17 Apr 2024 • Nashville, TN – hybrid, United States
Abstract:
For over two and a half decades, healthcare compliance professionals have gathered at HCCA’s Compliance Institute (CI) to share ideas, learn about the latest compliance issues, best practices, and emerging trends, and make key industry connections to drive compliance program and career success. CI welcomes attendees at all levels of compliance experience, from beginner to advanced, and provides them with the opportunity to earn live Compliance Certification Board (CCB)® continuing education units (CEUs) while enhancing their skillset.
Event listing ID:
1571483
23
Course — Large Eddy Simulation and Related Techniques
13 May 2024 - 17 May 2024 • Sint-Genesius-Rode (near Brussels) - hybrid, Belgium
Organizer:
von Karman Institute for Fluid Dynamics
Abstract:
The purpose of this Lecture Series is to offer a full overview of the present development and the potential of the Large Eddy Simulation (LES) of turbulent flows. The first part of the course will introduce and discuss fundamental principles, present state-of-the-art applications. The specific numerical problems related to the implementation of LES will be also presented. The second part will present applications of these approaches to various engineering fields of wide interest. The course will be concluded discussing the possible developments of LES and Detached Eddy Simulation (DES) which represents the most promising technique to extend the usefulness of LES for high Reynolds-number flows. The course will be delivered by internationally recognized experts. Its content is addressed both to researchers interested in the fundamental simulation of turbulence and engineers wanting to apply the LES technique or LES solvers to the accurate simulations of turbulent flows.
Event listing ID:
1572712
24
Course — Hands on Machine Learning for Fluid Dynamics 2024
27 May 2024 - 31 May 2024 • Sint-Genesius-Rode (near Brussels), Belgium
Organizer:
von Karman Institute for Fluid Dynamics
Abstract:
This course gives an overview and practical hands-on experience in integrating machine learning in fluid dynamics. The course originated as a compressed version of the course Machine Learning for Fluid Dynamics, given at the Research Master program at the von Karman Institute. After a brief review of the machine learning landscape, we show how to frame problems in fluid mechanics as machine learning problems, and we explore challenges and opportunities. Attendees will be guided through a series of tutorial sessions in Python and will tackle several relevant applications: aeroacoustics' noise prediction, turbulence modelling, reduced-order modelling and forecasting, meshless integration of (partial) differential equations, super-resolution and flow control.
Event listing ID:
1572755
25
Technology Training — 3rd International Symposium on the Recent Developments in Plate Steels
02 Jun 2024 - 05 Jun 2024 • Vail, CO, United States
Organizer:
Association for Iron & Steel Technology (AIST) - AIST Metallurgy – Processing, Products & Applications and Plate Rolling Committees
Abstract:
This symposium will highlight steelmaking and casting, hot rolling, accelerated cooling and direct quenching, flatness control, line pipe, hydrogen-induced-cracking (HIC) resistant steels, microstructure characterization, product strategies, as-rolled steels, heat-treated steels, welding, and hardfacing. As-rolled steel applications include wind towers, offshore structures, shipbuilding, and abrasion-resistant steels used in construction and machinery. Heat-treated steel applications include tank cars, pressure vessels, and quenching and partitioning to enhance steel product toughness and wear resistance.
Event listing ID:
1479456
Related subject(s):
26
Course — Multidisciplinary Design Optimization
09 Sep 2024 - 13 Sep 2024 • Sint-Genesius-Rode (near Brussels) - hybrid, Belgium
Organizer:
von Karman Institute for Fluid Dynamics
Abstract:
Innovative optimization and design techniques for modern aircraft (manned or UAV/UCAV) and engine systems aiming at maximum performance in a multidisciplinary context (aerodynamic efficiency, safety, drag, losses, weight, strength, heat fluxes, emission, noise, …), are now rapidly moving from research labs to industrial real and virtual platforms. To reach concurrently this level of excellence, emergent optimization methodologies require more and more robust and efficient associated software for a daily use in industrial collaborative design environments. This course intends to provide the basic concepts and tools behind this technology, both in single discipline (single point or multi point design) and multidisciplinary (fluid-structure interaction, fluid-acoustics, conjugate heat transfer, …) context. Subjects which will be treated in detail include: gradient based and steepest descent methods, adjoint methods, one shot or goal oriented methods, evolutionary/differential evolution algorithms on parallel environments, game strategies like Pareto Fronts and Nash Equilibrium, parameterization, surrogate and reduced-order modeling (Radial Basis functions, Artificial Neural Networks, Kriging …), multifidelity modeling approaches, robust design, … The content of this Course is oriented towards junior and experienced engineers and researchers involved in the field of multi disciplinary design and looking for innovative numerical solutions - or set of solutions- for complex multi criteria optimization problems.
Event listing ID:
1572721


Conference-Service.com offers, as part of its business activities, a directory of upcoming scientific and technical meetings. The calendar is published for the convenience of conference participants and we strive to support conference organisers who need to publish their upcoming events. Although great care is being taken to ensure the correctness of all entries, we cannot accept any liability that may arise from the presence, absence or incorrectness of any particular information on this website. Always check with the meeting organiser before making arrangements to participate in an event!

No tracking | No pop-ups | No animations
Last updated: 5 September 2023