Conferences and Meetings on Mechanical engineering

The international MTZ Conference “The Powertrain of Tomorrow” is aimed at managers and experts in powertrain development and electrification. It is a must-attend event for engine and vehicle manufacturers, their suppliers and development partners, teaching staff and engineers from universities, representatives of authorities and associations, and technicians active in this field.

Automotive Engineering, Roads and Railways,    Trade Shows and Exhibitions

PSG College of Technology, DEPARTMENT OF PRODUCTION ENGINEERING

Phone: [9489227914];     Email: spratheeshkumarth@gmail.com

Additive Manufacturing, 3D Printing, Advanced Manufacturing

Additive Manufacturing, 3D-Printing,    Continuing Professional Education, Courses (general)

Association of Engineers, Architects and Graduates in Technological Sciences in Israel (AEAI)

Welding, Joining and Additive Manufacturing WJAM

Additive Manufacturing, 3D-Printing,    Metallurgy and Materials Science

AVL Powertrain UK and Imperial College London

The Future Powertrain Conference (FPC2020) is a two day UK event created to bring together industry and academic experts within the powertrain development field. It will open up presentations and discussions on the solutions to the challenges faced by the engineering industry in the UK and internationally over the next ten years.

The aim of this conference is to allow participants an opportunity to discuss the recent developments in the field of Advanced Lightweight Materials, Structures, its various applications and review challenges faced by the research forum in the 21st century. It is committed to excellence in research and teaching, interdisciplinary education and the active promotion of promising young scientists. The conference consists of contributed posters, invited oral and virtual presentations. Best papers will be judged and awarded for each technical session during the conference. Another goal of the conference is to attract researchers from countries of Asia and Asian-Pacific Ocean Region, other countries to fulfillment of joint investigations and scientific collaboration.

Phone: [6304356358];     Email: icalms2020@gmail.com

Processing of Aluminium and Magnesium alloys, Smart lightweight structures, Structural failure under impact, energy absorbing systems and crashworthiness, Structural analysis and Optimization, Composite materials and processing, Unconventional machining and Additive manufacturing processes

Automotive Engineering, Roads and Railways,    Metallurgy and Materials Science

Dear Colleagues, It is an honour and a pleasure for me to invite you to the first IKV International Symposium on Plastics Technology on 10 March 2020 in Aachen. The symposium will bring together scientists and experts from all over the world who are involved in the future of plastics. The symposium will offer an exceptional forum to learn, participate and network with the people who play a leading role in the field of plastics technology. The scientific program will keep you abreast of the latest know-how in polymer science and technology. Our session topics: Additive manufacturing; Circular economy; Extrusion; Injection moulding; Lightweight technologies; Plastics Industry 4.0. With your paper and presentation, you can contribute to enhancing the quality and diversity of the discussions. You should therefore take the opportunity to present your topic to a broad scientific public. The symposium will, without doubt, be a valuable occasion to generate new ideas in the middle of a motivated scientific community. I look forward to welcoming you in Aachen, Prof. Dr.-Ing. Christian Hopmann

Phone: [+49 241 80-28363];     Email: symposium@ikv.rwth-aachen.de

Additive manufacturing, Circular economy, Extrusion, Injection moulding, Lightweight technologies, Plastics Industry 4.0

Plastic Processing, Composite Materials,    Additive Manufacturing, 3D-Printing

The coming International Colloquium Plastics Technology, due to take place on 11–12 March 2020 in the Eurogress Aachen, will be a very special occasion: It will be the 30th time that the world of plastics meets up for the Colloquium in Aachen and, at the same time, we will celebrate in 2020 not only the 70th birthday of IKV but also the 150th anniversary of RWTH Aachen University. The delegates at the 30th Colloquium will be able to attend a total of 15 lecture sessions, each consisting of two presentations from IKV scientists and a keynote paper from an industry expert. As far as the topics are concerned, the sessions will cover the entire range of IKV research. In addition, around five plenary papers given by speakers from science and industry will draw attention to special trend topics.

The accompanying trade show, the traditional get-together on the evening before the Colloquium and the tour of the IKV laboratories and pilot plants will offer an excellent opportunity for networking. You will find further information on the content of the program in the next edition of IKV.Insight.

We look forward to welcoming you again in Aachen for the Colloquium so that we can celebrate our anniversaries with you. And perhaps we will also be able to celebrate with you the premiere of our International Symposium on Plastics Technology, which will be held for the first time on 10 March 2020 – the day before the Colloquium.

Phone: [+49 241 80-93877];     Email: akademie@ikv.rwth-aachen.de

Additive manufacturing, Circular economy, Extrusion, Injection moulding, Lightweight technologies, Plastics Industry 4.0

Plastic Processing, Composite Materials,    Additive Manufacturing, 3D-Printing

Polytechnic Military School (EMP), Bordj El Bahri

On behalf of Polytechnic Military School (EMP), located at Bordj El Bahri (around 30 km east of the Capital city, Algiers), it is a great pleasure to announce you the organisation of the 12th edition of the Conference on Mechanical Engineering that will be held on March 17-18, 2020. This event, organised once every two years, aims to provide an appropriate academic forum for the research actors, both academician and industrial, to exchange their findings and ideas on all mechanical engineering aspects, expected to strengthen the collaboration for bringing better insights to the research future orientations. The opportunity will also be given to PhD students to take part in this Conference for offering innovative technological solutions that could be useful for the industry and economic operators.

Phone: [+213 21 86 34 69];     Email: jm@emp.mdn.dz

Fluid Mechanics and Energetics, Combustion and biofuels, Heat and Mass Transfer, Aerodynamic and Aeroacoustic, Turbomachinery and thermodynamics, Materials Engineering, Surface Engineering, Coatings and Tribology, Corrosion, Plasticity, Fatigue, fracture mechanics and stress analysis, Structural mechanics, Diagnostics and Maintenance, Safety Engineering and Risk Analysis, Robotics, Mechatronics and Mobile Platforms, Automotive Engineering, Transportation Systems and Multibody Dynamics, Bioengineering and Bio-Mechanics, Virtual Design, Prototyping and Visualization.

Institution of Mechanical Engineers (GIK Chapter)

GIK Institute of Engineering Sciences and Technology is organizing the 2nd International Workshop on Functional Reverse Engineering of Machine Tools (WRE 2020) on 21–22 March, 2020. The Workshop has the technical sponsorship of IMechE (UK) and IEEE (USA), and the financial sponsorship of the Department of Science and Technology, Government of KP. WRE 2020 invites original Book Chapters to be published by CRC Press (Taylor & Francis Group, USA). The Book Chapters of the 1st International Workshop on Functional Reverse Engineering of Machine Tools have already been published by CRC Press.

Phone: [923324636748];     Email: wre@giki.edu.pk

Engineering design practices, Manufacturing processes and systems for discrete products, Casting versus fabrication, Feedback system modelling, PCB design and fabrication, Off-the-shelf hardware vs. In-house development of electronic hardware, Microprocessors and micro-controllers – future trends, Human computer interface / Man Machine Interface, SERCOSE III, Industrial Ethernet, CAD/CAM, Virtual reality, Sensors, transducers and actuators, Internet of Things, Cloud computing, E-Commerce, Software modelling, Open source software vs. proprietary software/ in-house software development, Rapid product development/rapid prototyping: A Functional Reverse Engineering perspective, Product evolution: A Functional Reverse Engineering perspective, Enterprises of Functional Reverse Engineering, Industry 4.0, Any other topic related to machine tool development.

Galleon (Shanghai) Consulting Co., Ltd.

The statistics from Flight International predicts that over the next two decades, 42,800 cargo and civilian aircraft will be delivered worldwide. This means that at least 86,599 new engines will be delivered in the global market by 2035, and the number of active engines will grow from the current 60,000 to about 100,000. With the number expected to jump from 28,500 to 61,000 by 2035, especially in the region of Asia Pacific, which is anticipated to grow with the highest CAGR during the forecast period.

The "Made in China 2025" issued by the State Council clearly proposed to "establish an industrial system for the independent development of engines", and during the 13th Five-Year Plan period, China launched a major special project for aviation engines and gas turbines. Today, the Chinese aviation industry continues to exert its strength and is closing the gap with world-class engines. In the worldwide stage, the development and breakthrough of aircraft engine requires wide range of solutions and multi-disciplinary collaboration of suppliers, transnational discussion and the groundbreaking technology exploitation. There are still some technical difficulties that China is facing such as the titanium alloy or composite material of aircraft engine, the whole leaf disk manufacturing and repair technology, the manufacturing technology of single-crystal hollow turbine blade etc. Furthermore, there are some other technology will also be discussed and applied in the aviation engine design and manufacturing such as 3D Printing, Digital twin technology.

Phone: [+86 (0)21 5155 9030];     Email: marketing@galleon.cc

Ø  Standards and Certification Ø  Emission Reduction Technology Ø Intelligent Manufacturing Technology Ø Superalloy Materials

Haus der Technik e.V.

Dieses Seminar vermittelt die Grundlagen der Schädigungstheorie und die nötigen Begrifflichkeiten. An ausgewählten Motorbauteilen, Motorbaugruppen und Systemkomponenten werden Aufbau, Funktion, Schadensbilder und deren Beurteilung vorgestellt.

Haus der Technik c/o IMOS GmbH, Weißenburger Str.3, 93055 Regensburg;     Phone: (0) 201/18 03-312;     Email: h.reff@hdt.de

Verbrennungsmotor, Benzinmotor, Dieselmotor, Motorenteile, Motorbauteil, Motorbaugruppen, Systemkomponenten, Schadensanalyse, Schadensbilder, Schadensbeurteilung, Kurbeltrieb, Schraubenkraftverlust, Schraubverbindungen, Turbolade, Steuerriemen, Gleitlager

44th International JVE Conference is an integral part of Vibroengineering Series Conferences and will be held in Dubai, United Arab Emirates. The Conference is organized by JVE International and Herriot Watt University Dubai Campus.

Phone: [0037067001533];     Email: m.ragulskis@jvejournals.com

Vibration Engineering, Acoustics, engineering applications, Mechanical vibrations, Fault diagnosis, Vibration generation and control,   Seismic engineering, transportation engineering, structural vibrations,   biomedical engineering, Chaos,     nonlinear dynamics and applications, Electrical Engineering,     Fractional dynamics,     Scientific Conference

Acoustics, Noise and Vibration,    Civil Engineering and Construction

AMME Dubai 2020 conference aim is to emphasize new trend in mechanical world and the theme of the conference is “Emphasizing latest updates and technological advancements in Mechanical Engineering”.

Phone: [1-650-835-7727];     Email: jameskevin@ammedubai.org

The Institution of Engineering and Technology.

Electrical Engineering,    Electronic Engineering

Haus der Technik e.V.

Dieses Seminar vermittelt sowohl Grundlagen zur Funktionsweise der motorischen Zündung als auch deren Grenzen im realen Einsatz. Dabei werden Komponenten von Funkensystemen behandelt und die motorischen Einflüsse auf deren Funktion erläutert.

Haus der Technik c/o IMOS GmbH, Weißenburger Str.3, 93055 Regensburg;     Phone: (0) 201/18 03-312;     Email: h.reff@hdt.de

Seminar, Zündsysteme, Kraftstoff, Kraftstoffeinsparung, Kraftstoffverbrauch, Zündtemperatur, Emissionen, Abgasemissionen, Reduzierung der Abgasemissionen, Verbrennungsmotoren, Gasmotoren, Benzinmotoren, Ottomotoren, Brennverfahren, Zündung, Gemisch, OT, Funkenzündung, Funkenzündungen, motorische Verbrennung, Zündspannung, Funkenbrenndauer, Lebensdauer, Lebensdaueranforderungen, alternative Zündverfahren, CO2-Ersparnis, CO2, NOx, CO, Kohlendioxyd, Zündsystem, Brennverfahren, Funken-Zündung, Zündkerzen, Zündspulen, Zündverteiler, Funkenzündung, Selbstzündung, Zündung, Sensorik, Sensoren, alternative Zündsysteme, motorische Zündung, Komponenten von Funkensystemen, Funkensystemkomponenten

Continuing Professional Education, Courses (general),    Automotive Engineering, Roads and Railways

"Hybrid Materials and Structures 2020" covers the entire spectrum of topics, from basic materials to design, from production to application, and thus provides the basis for an in-depth understanding of application-specific material and component behavior. The only limitation is the focus on material combinations that perform structural tasks in some way.

Email: dgm@dgm.de

hybrid materials, structures, composites, multi-material design, material compatibility, interface properties, residual stresses, materialography, microanalytical investigations, mechanical testing, non-destructive testing, quality assurance, material modelling, construction methods, joining techniques, life cycle assessments, intrinsic hybrid composites

Metallurgy and Materials Science,    Automotive Engineering, Roads and Railways

Society of Tribologists and Lubrication Engineers

45th International JVE Conference is an integral part of Vibroengineering Series Conferences and will be held in Dublin, Ireland. The Conference is organized by JVE International and University College Dublin.

Phone: [0037067001533];     Email: m.ragulskis@jvejournals.com

Vibration Engineering, Acoustics, engineering applications, Mechanical vibrations, Fault diagnosis, Vibration generation and control,   Seismic engineering, transportation engineering, structural vibrations,   biomedical engineering, Chaos,     nonlinear dynamics and applications, Electrical Engineering,     Fractional dynamics,     Scientific Conference

Acoustics, Noise and Vibration,    Engineering (general)

Fraunhofer Institut für Produktionstechnologie IPT, Wekzeugmaschinenlabor WZL der RWTH Aachen

Unter dem Motto Internet of Production – Turning Data into Value zeigt das 30. Aachener Werkzeugmaschinen-Kolloquium, das am 14. und 15. Mai 2020 im Aachener Eurogress stattfinden wird, anhand bewährter Erfolgsbeispiele die Mehrwerte der umfassenden Vernetzung der Produktion auf. Referentinnen und Referenten führender Unternehmen aus unterschiedlichen Branchen sprechen in gemeinsam erarbeiteten Expertenvorträgen darüber, welche Aspekte der Digitalisierung sie für die Produktion der Zukunft weiter verfolgen werden. Die traditionsreiche Konferenz mit dem Anspruch stets die neuesten Entwicklungen der Produktionstechnik zu reflektieren ist damit Netzwerktreffen und Informations-Hub zugleich: Im Austausch mit mehr als 1300 Teilnehmerinnen und Teilnehmern unterschiedlicher Disziplinen sowie mit einem hochkarätig besetzten Vortragsprogramm und Besichtigungstouren zu den gastgebenden Forschungseinrichtungen bietet das AWK'20 einen weltweit einzigartigen Einblick in die Trends der angewandten Forschung und Entwicklung für Fach- und Führungskräfte aus Industrie und Wissenschaft, die die Produktion von morgen gestalten wollen.

Phone: [+49 241 80 236-14];     Email: info@awk-aachen.de

SMi Group

SMi Group are delighted to present the 6th annual Helicopter Technology Central and Eastern Europe! This year, the awaited event will return to Budapest, Hungary on the 20th and 21st May 2020 where delegates will be given a fantastic opportunity to hear from key military figures and government personnel. Key topics to be discussed: modernisation programmes, readiness of regional rotary fleets, procurement goals, national security, operations and interoperability, platform and programme upgrades, and much more. The two-day conference will be expected to have the widest European nations, where key industry players such as Airbus, Bell, Leonardo, Sikorsky and many more are anticipated to attend! There will also be strong host nation representation from the Hungarian Forces as well as other senior military experts from the Central and Eastern European region.

Email: cgozo@smi-online.co.uk

Rotary fleets, Rotary aircraft, MRO (Maintenance, repair, overhaul), Multirole, Utility, procurement, acquisition, operational readiness/capability, SAR (Search and rescue), Interoperability, Helicopter Technology Central and Eastern Europe 2020, military, defence, defense, Hungarian Forces, aircrafts, NATO, Bell Helicopters

Aviation & Spaceflight,    Military engineering

4th International Symposium on Fatigue Design and Materials Defects 2020,

26-28 May 2020, Potsdam, Germany

Following the successful symposia of Trondheim in 2011, in Paris in 2014 and in Lecco in2017 we wish to announce the 4th International Symposium on Fatigue Design and Material Defects

from May 26 – 28 2020 in Potsdam.

Material defects such as non-metallic inclusions, pores, micro-shrinkages etc. play a crucial role in fatigue crack initiation and propagation which in turn has significant consequences for structural integrity in terms of lifetime, fatigue strength and other characteristics of cyclically loaded components.

The main objectives of the symposium are to improve the understanding of the mechanisms and the impact of defects on structural integrity, and to work out measures to improve the fatigue properties of materials and components.

To that purpose presentations are welcome which address the following

topics:

• Defects and manufacturing processes

• Defect detection and monitoring

• Statistical considerations

• Defects and fatigue strength

• Short fatigue crack propagation starting at defects

• Critical defect sizes

• Defects as root causes of structural failure

• Modelling fatigue life and strength taking into account defects

All materials are concerned, particularly:

• High strength steels

• Cast aluminium alloys

• Nodular cast iron

• Sinter materials

• Weldments

• Materials generated by Additive Manufacturing

The organizers look forward receiving many contributions to the 4th International Symposium on Fatigue Design and Materials Defects 2020. In particular young scientists are very welcome to actively contribute to the conference by submitting an abstract.

The symposium will be chaired by Prof. Dr. Uwe Zerbst and Dr. Mauro Madia, Bundesanstalt für Materialforschung und -prüfung, Berlin (Germany)

We are looking forward seeing you in Potsdam.

Homepage:

https://fdmd2020.inventum.de/home/?pk_campaign=Portal4

Conference Office

INVENTUM GmbH

Marie-Curie-Straße 11-17

53757 Sankt Augustin (Germany)

+49 (0) 2241 2355449

fdmd@inventum.de

Phone: [022412355449];     Email: fdmd@inventum.de

functional materials, bioinspired materials, formation, hierarchical structure, properties of complex-shaped biological materials, biological principles, mechanical properties, Multifunctional Inorganic Materials, Funktionsmaterialien, bioinspirierte Materialien, Bildung, hierarchische Struktur, Eigenschaften von komplex geformten biologischen Materialien, biologische Prinzipien, mechanische Eigenschaften, multifunktionale anorganische Materialien

Metallurgy and Materials Science,    Chemicals and Materials Science

The American Society of Mechanical Engineers (ASME)

The ASME Energy Sustainability Conference is focused on identifying innovative technologies, research and design advances, and solutions toward a path of renewable and sustainable energy, including utility-level systems integration.

Conventional and Renewable Energy Production,    Ecosystems, Environment and Sustainable Development

The American Society of Mechanical Engineers (ASME)

This year the conference is collocated with the ASME’s Fluids Engineering Division Summer Meeting (FEDSM) and the Summer Heat Transfer Conference (SHT). The conference is intended to provide a platform for researchers to exchange information and identify research needs in this emerging area encompassing many engineering, basic sciences, and bio-medical disciplines. Both fundamental aspects including transport studies at the nano, micro, and mini scales as well as practical applications including thermal management, energy conversion, lab on a chip, fuel cells, micro-heat exchangers, and biomedical devices will be covered. We’ve implemented “Lightning Talks” for Poster Presenters, and we will have many jointly shared tracks and sessions with the Heat Transfer Division and Fluids Engineering Division.

Trade Shows and Exhibitions,    Thermodynamics, Fluid Dynamics and Statistical Physics

TURKEYTRIB 2020 is organized by Ecovario Technology Ltd. Istanbul TURKEY

We are very pleased to announce that the 3rd International Conference on Tribology TURKEYTRIB 2020 will be held from 18 to 20 June 2020 at the Elite World Prestige Hotel Taksim-Ä°stanbul-TURKEY. The scope of this conference embraces the state of art and future trends in tribology research and application, emphasizing the necessity of facilitation intellectual collaboration across both disciplinary and national-international boundaries. The main objective of the conference is to provide a unique opportunity of presenting and discussing recent developments in different aspects of Tribology and strengthen the linkage between academia and industry. The conference consists of scientific sessions, symposia on specific topics, exhibitions and various collateral events. Turkish and Foreign groups of experts will have chance to share information and get in touch with other groups in all part of Tribology. Nowadays these aspects are becoming more and more important both in respect of human life and environment.

Phone: [+905324768608];     Email: kalelih@yahoo.com

Tribology, Lubrication, Friction, Wear, Oils, Additives, Nanotribology, Materials, Chemistry, Surface analysis, Microscopy, SEM-EDX see the topic in the website: http://www.turkeytribconference.com/index.php/en/

The American Society of Mechanical Engineers (ASME)

Join over 2,800 turbomachinery colleagues from around the world at ASME TURBO EXPO, ASME's premier turbomachinery technical conference and exposition, set for June 22 – 26, 2020 in London, England UK. The 5-day exhibition attracts the industry's leading professionals and key decision makers, whose innovation and expertise are helping to shape the future of the turbomachinery industry. Turbo Expo will also feature a Student Poster session inside the exhibition.

The American Society of Mechanical Engineers (ASME)

The Manufacturing Engineering Division (MED) of ASME sponsors the Manufacturing Science and Engineering Conference (MSEC) every June. MSEC is the foremost annual forum for the scholarly exchange of advanced manufacturing research knowledge. It is intended to disseminate the most recent developments in manufacturing research through technical presentations, poster sessions, and panel sessions.

University of Waterloo, McGill University

The HI-AM Conference is the only academic conference in Canada focused exclusively on metal additive manufacturing. With over 100 additive manufacturing experts and decision-makers from academia, research institutes, industry and government participating, HI-AM 2020 is an event not to be missed. The focus of HI-AM Conference is to provide a platform for the presentation of recent R&D advancements in the field of metal additive manufacturing under 4 research themes: (1) material development, (2) advanced process modeling, (3) process monitoring and control, (4) innovative AM processes/products.

Phone: [+1(519)888-4567 x36765];     Email: fliravi@uwaterloo.ca

3D Printing, Additive Manufacturing, Metallurgy, Materials Science, Modeling, Controls Engineering, Quality Assurance, Powder Bed Fusion, Directed Energy Deposition, Binder Jetting, Bioprinting, Metal Processing

Additive Manufacturing, 3D-Printing,    Metallurgy and Materials Science

The American Society of Mechanical Engineers (ASME)

Join your colleagues from industry, academia and government at the 39th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2020) in Fort Lauderdale, USA from June 28 to July 3. OMAE 2020 is the ideal forum for researchers, engineers, managers, technicians and students from the scientific and industrial communities.

American Automatic Control Council (AACC)

The American Control Conference (ACC) is an annual 3-day meeting that brings together an international community of researchers and practitioners in all areas related to the engineering and science of control systems. The ACC is held under the auspices of American Automatic Control Council (AACC), the US National Member Organization of the International Federation of Automatic Control (IFAC).

Robotics, Automation & Mechatronics,    Electronic Engineering

Royal Society of Chemistry / University of Aveiro, Department of Mechanical Engineering

3rd International Conference on Nanomaterials Science and Mechanical Engineering (3rd ICNMSME-2020) looks for significant Modern Problems of Nanomaterials Science and Mechanical Engineering, to provide a platform to the global researchers and practitioners from both academia as well as industry to meet and share cutting-edge development in the fields, to give possibility for young scientists and students present results and find your place in the future world.

Nanoscale Particles, Colloids and Emulsions,    Clusters, Nanomaterials, Graphene and Fullerenes

Elsevier; Fudan University in Shanghai

The ICEFA is a long-running conference series which brings together world-class researchers, users and specialists involved in all aspects of failure analysis and prevention from the fields of mechanical, manufacturing, aeronautical, civil, chemical, corrosion and design engineering. For the ninth event we are very excited to be working for the first time with the Chinese Failure Analysis Institution and with Co-Chair, Professor Zheng-Guo Yang, who has kindly offered to host the conference at Fudan University in Shanghai.

Engineering failure modes for metallic and non-metallic engineering materials Approaches to failure analysis Role of service loading in failure analysis Case studies of failures in industry sectors such as aerospace, marine and offshore, automotive, rail, power generation, mining and minerals, consumer goods, medical devices and others Historical disasters Structural and architectural failures Failure analysis and joining technologies Role of condition monitoring and NDT in failure avoidance Failure analysis, maintenance and reliability Role of failure analysis in the design process Legal matters, ethical issues and insurance in the failure analysis industry Training and accreditation in failure analysis research and industry

The American Society of Mechanical Engineers (ASME)

Nuclear Engineering, Turbomachinery, Electrical Engineering, Oil and Gas in energy industry, Digitalization in energy industry

Courses and Events for Physics Students,    Engineering (general)

Institute of Refrigeration (IOR)

The aim of the event is to bring together the disciplines of RACHP and ORC (Organic Rankine Cycle) to explore their common challenges and learn from each other about the solutions being developed to tackle them.

The American Society of Mechanical Engineers (ASME)

The Power Conference, hosted by ASME’s Power Division, is a unique event that brings together a blend of attendees from industry, research, and academia to discuss current power industry issues, applications, and emerging technologies. This is a place for power professionals to network with colleagues, discuss diverse experiences and lessons learned in generation facilities, get training and exposure to vendors and suppliers as well as promote existing and emerging technologies.

Fuels and Combustion, Operational Issues, Cycling and Low Load Operational Challenges, Heat Rate Improvements, Fuel Flexibility, Asset Management, Renewable Energy Technologies (Solar, Wind, Hydro, etc.), Business and Economic Considerations Environmental Issues, Emerging Technologies, Equipment Upgrades, Energy Storage Solutions, Advanced sCO2 Cycles, Data Analysis (CFD, TH, FEA, Models, Analytics, etc.), Other advanced R&D topics

Conventional and Renewable Energy Production,    Trade Shows and Exhibitions

The American Society of Mechanical Engineers (ASME)

IDETC/CIE 2020 will highlight emergent technologies that impact the critical engineering issues of product design and development, manufacturing, and the management and integration of information systems throughout the product life-cycle. These events are key international meetings for design and manufacturing engineers in academia, government and industry.

22nd International Conference on Advanced Vehicle Technologies (AVT)
40th Computers and Information in Engineering Conference (CIE)
46th Design Automation Conference (DAC)
17th International Conference on Design Education (DEC)
25th Design for Manufacturing and the Life Cycle Conference(DFMLC)
32nd International Conference on Design Theory and Methodology (DTM)
44th Mechanisms and Robotics Conference (MR)
14th International Conference on Micro- and Nanosystems (MNS) (Conference)
16th International Conference on Multibody Systems, Nonlinear Dynamics, and Control (MSNDC)
32nd Conference on Mechanical Vibration and Noise (VIB)
24th Reliability, Stress Analysis and Failure Prevention Conference (RSAFP)

International Union of Theoretical and Applied Mechanics (IUTAM)

ICTAM congresses are organized under the auspices of the International Union of Theoretical and Applied Mechanics (IUTAM) and gather every four years the mechanics community from around the world. These are unique occasions to discuss of science, strengthen relationships, create new contacts and gain a direct experience of the new progresses in mechanics and of the continuously growing field of applications of this ever-green discipline.

Prism Scientific Services

Energy Oceania Conference embraces a strong motive of promoting the novel innovations to overcome the existing challenges in the energy transition to a sustainable future by laying a global platform. The renewable energy conference sessions designed in such a way that the theme and topics of the conference cover the latest innovations, energy policy, government initiatives and project developments across the energy sector and by examining all possible ways which speak about renewable energy. Energy Oceania 2020 conference gives outmost priority of creating a wide space for the knowledge to get transplant by representing the world-class speakers and through the diverse agenda of Posters, Presentations, P2P (Peer to Peer meetings), B2B (Business to Business meetings), Industry Booth, etc. We value our attendee's time that they are investing in attending the renewable energy conference in Australia. With no doubt, the Energy Oceania team will give you an unforgettable experience which thrills and satisfy one's curiosity in acquiring things at the finest.

Phone: [+61 383 913 150];     Email: energyoceania@gmail.com

Renewable Energy, Solar Energy, Wind Energy and Hydro Power, Marine Energy, Geothermal Energy, Biomass, Bioenergy and Biofuels, Hybrid Renewable Energy Systems, Hydrogen and Fuel Cells, Energy Storage, Power and Energy Engineering, Smart grid, Micro-Grid, Off-Grid, Electric Vehicles – Evs / Hvs, Low Energy Architecture, Carbon Capture & Storage, Smart Cities and Sustainability, Water-Food-Energy Nexus

Ecosystems, Environment and Sustainable Development,    Electrical Engineering

Research papers reporting on new developments in powertrain design, modelling and control for conventional, hybrid and electric vehicles. Industry and development papers reporting on actual developments of technology, products, systems and solutions. In addition, PMC 2020 solicits special session proposals to stimulate in-depth discussions in special areas relevant to the conference theme.

Email: k.ebrahimi@lboro.ac.uk

Electric Drivetrains Hybrid Powertrains System Identification and Control Powertrain Optimization Emission Legislation Powertrain / engine / Vehicle testing Fuel Cell Noise, Vibration and Harshness Co-Simulation, FMI, FMU integration Thermal Management Combustion Engine Modelling Performance / Drivability / Drive Cycles ECU development Mapping and Calibration Hardware -in-Loop testing Driveline and Transmission Tribology and Friction

Automotive Engineering, Roads and Railways,    Engineering (general)

DGM e. V. c/o Inventum GmbH

Die 54. Metallographie-Tagung wird im Jahre 2020 in Saarbrücken stattfinden. Die Themen werden neben den traditionellen Schwerpunkten der Präparation und mikroskopischen Gefügeabbildung, der Gefügeanalyse sowie der metallographischen Schadensanalyse vor allem in zwei zukunftsträchtigen Bereichen liegen, für die der Saarbrücker Campus mit seinen Experten und seiner technischen Ausstattung wie kein zweiter in Deutschland steht. Das ist einerseits die Weiterentwicklung und Anwendung aller Tomographieverfahren von der Mikro- über die Nano- bis zur atomaren Skala und andererseits die Anwendung modernster Informatikkompetenz auf die drängende systematische und effiziente Digitalisierung.

DGM e. V. c/o Inventum GmbH;     Phone: [+49 (69) 75306 741];     Email: metallographie@dgm.de

Präparationstechnik, mikroskopisch, Charakterisierung, Materialographie, Materialklassen, Qualitativ, quantitativ, Gefügeanalyse, Korrelation, Materialeigenschaften, Tomographie, 3D, digital, Bildverarbeitung, Analytik, Gefüge, Untersuchungen, Bewertung, Schadensfälle, Metallographie, Metallografie, Materialentwicklung, Prozessentwicklung, Struktur, Funktion, Werkstoffe, Digitalisierung, Präparation, Schadensanalyse, Zukunft, Tomographie, Mikro, Nano, atomar, Informatik, Materialwissenschaft, DGM, Metalle, Stahl, Eisen, Keramik, Aluminium

Metallurgy and Materials Science,    Additive Manufacturing, 3D-Printing

Am 17. und 18. September 2020 findet das von der DGM e.V. und dem Fachausschuss „Strangpressen“ organisierte Symposium „Strangpressen – Innovative Anwendungen und zukünftige Märkte“ in Neu-Ulm im Edwin-Scharff-Haus statt. Mit dem Symposium wird interessierten Fachbesuchern die Möglichkeit gegeben, aktuelle Verfahrensentwicklungen und zukünftige Perspektiven der Herstellung und Verwendung von Leicht- und Schwermetallhalbzeugen im Kontext von Digitalisierung und globalen Märkten kennenzulernen und sich mit führenden Fachleuten auszutauschen.

Phone: [+49 (69) 75306 741];     Email: strangpressen@dgm.de

Werkstoffwissenschafen, Strangpressen, Verfahrensentwicklung, Schwermetallhalbzeug, Leichtmetallhalbzeug, Prozesssteuerung, Werkzeugbau, Profildesign, Halbzeug, Aluminiumhalbzeug, Kupferhalbzeug, Anlagentechnik, Verfahren

Metallurgy and Materials Science,    Engineering (general)

46th International JVE Conference is an integral part of Vibroengineering Series Conferences and will be held in Timisoara, Romania. The Conference is organized by JVE International with the partnership of Eftimie Murgu University of Resita, Center for Vibrodiagnostics and Romanian Academy - Timisoara branch.

Phone: [0037067001533];     Email: m.ragulskis@jvejournals.com

Vibration Engineering, Acoustics, engineering applications, Mechanical vibrations, Fault diagnosis, Vibration generation and control,   Seismic engineering, transportation engineering, structural vibrations,   biomedical engineering, Chaos,     nonlinear dynamics and applications, Electrical Engineering,     Fractional dynamics,     Scientific Conference

Acoustics, Noise and Vibration,    Engineering (general)

After a phenomenally successful inaugural Vibration Institute Conference in the Middle East, and 43 annual conferences in the U.S.A, RITEC is proud to host the second Vibration Institute Middle East Conference in Sofitel Hotel in the heart of Cairo. The conference will consist of three paper tracks and an exhibition. World-renowned experts in the field of Condition Monitoring are presenting, and leading manufacturers of PdM/CBM equipment and software are exhibiting. Do not miss your chance to enhance your Condition Monitoring skills!

RWTH International Academy

Lernen Sie mechatronische Bewegungssysteme, das heißt Mechanik, Sensorik, Antriebe und Steuerungen, simulativ abzubilden. Sie erlangen Grundwissen zur Simulation, können MathWorks Simulink einsetzen und Simulationsmodelle strukturieren. Zusätzlich werden Sie in die Lage versetzt, Systeme durch Simulationen auszulegen und zu optimieren.

Phone: [+492418097865];     Email: further-education@academy.rwth-aachen.de

Continuing Professional Education, Courses (general),    Engineering (general)

Society of Tribologists and Lubrication Engineers

American Automatic Control Council (AACC)

The American Control Conference (ACC) is an annual 3-day meeting that brings together an international community of researchers and practitioners in all areas related to the engineering and science of control systems. The ACC is held under the auspices of American Automatic Control Council (AACC), the US National Member Organization of the International Federation of Automatic Control (IFAC).

Robotics, Automation & Mechatronics,    Electronic Engineering

Society of Tribologists and Lubrication Engineers

American Automatic Control Council (AACC)

The American Control Conference (ACC) is an annual 3-day meeting that brings together an international community of researchers and practitioners in all areas related to the engineering and science of control systems. The ACC is held under the auspices of American Automatic Control Council (AACC), the US National Member Organization of the International Federation of Automatic Control (IFAC).

Robotics, Automation & Mechatronics,    Electronic Engineering

American Automatic Control Council (AACC)

The American Control Conference (ACC) is an annual 3-day meeting that brings together an international community of researchers and practitioners in all areas related to the engineering and science of control systems. The ACC is held under the auspices of American Automatic Control Council (AACC), the US National Member Organization of the International Federation of Automatic Control (IFAC).

Robotics, Automation & Mechatronics,    Electronic Engineering